§ 17.8.306. Lot design requirements.

1.

The configuration of each lot within the subdivision shall provide a building envelope meeting the setback requirements of the zone which will readily accommodate a variety of housing designs. Lots shall not include peculiarly shaped elongations or atypical configurations intended primarily to meet the area or other dimensional requirement for lots within the zone.

2.

The minimum setback requirement for any side lot line having an internal angle with an adjacent side lot line less than one hundred twenty degrees which results in a side lot line having a bearing which is closer than forty-five degrees to the bearing of the front lot line shall be thirty feet. In the instance of a front lot line which includes a curve segment or more than one bearing, the front lot line shall be the bearing formed by a line connecting the end points of the front lot line (cord bearing), but not including the curb return portion of a corner lot (see examples).

(Ord. No. 07-01-07)